6.5TD C/K Trucks > Vacuum Pumps > Vacuum Pump, 6.5 TD 92-95 w/ac
|
Brand new vacuum pump for all 92-95 6.5 TD C/K trucks with a/c
|
|||||||||||||
|
|||||||||||||
|
Brand new direct replacement vacuum pump for all 92-95 6.5TD C/K trucks with a/c. Your vacuum pump controls your turbo, and on Light duty trucks the EGR valve also. If you are experiencing turbo problems, it may just be low vacuum. Vacuum should be a minimum of 15 inches of vacuum at the wastegate valve to operate properly. Preferably 25+ inches of vacuum. Anything less then 15 and your boost will be low and you may trip a code with your ses light. This pump is belt driven off of your serpentine belt. It is recommended to replace the pulley at this time, its p/n ssd-757 also in this category. If purchased at the same time, we can install a new pulley on your new pump on request at no charge. If using your old pulley over, you must use pulley install tool ssd-7021 or damage to the pump will result. The pulley cannot be PRESSED on or off. |
|||||||||||||
|
|
|||||||||||||


