6.5TD C/K Trucks > Cooling System Upgrades & Components > 6.5 Turbo Diesel Cooling Fan Upgrade (early)
|
SSDiesel SupplyTM 6.5 Diesel to Duramax Fan Conversion 1992 thru 1999-1/2, C/K trucks, subs and G vans |
|||||||||||||
|
|||||||||||||
|
Replace your inefficient 8 or 9 blade 20 inch stock fan and tired fan clutch with the massive/aggressive-pitch 21 inch Duramax fan and brand new clutch for less money then just a new fan clutch alone! This blade is the same GM part as used on all Duramax diesel engines. The clutch is a HD made in USA unit modified to adapt the Duramax fan to the 6.5 TD water pump, and engagement is approximately 15DF sooner then your stock clutch for better cooling. Our Special Thermal Fan Clutch...
A thermal fan clutch is engaged on a cold startup because the fluid drains into the working area when the engine is shut off. The fan clutch will slow down shortly after startup as a result of a pumping action produced by a difference in speed between the shaft and the body of the clutch. Our Special Clutches are specifically designed to engage at lower temperatures than the original equipment parts that they replace. NOTE: for use only on the vehicles and applications listed above. Use on any other vehicle or application is at your own risk. May not work on Motorhomes. |
|||||||||||||
|
|||||||||||||


Brand new massive 21 inch GM Duramax HD cooling fan with special fan clutch which will adapt the Duramax high volume fan for serpentine belt driven 6.5 Turbo Diesel thru 1999 with flange-mount type clutch (as pictured) in C/K and G vans. (excluding motorhomes & H1's) Also available for all 1999 1/2 - 2002 screw-on mount type clutch (additional fee) see our products page. From SSDiesel SupplyTM, the 6.5TD specialists.